Last updated: 16/10/2022

How we pick our products

35Products analysed

63Hours spent

23Evaluated articles

208User reviews

A fan is a mechanical device that uses an electric motor to create airflow. Fans are used in many applications, including air conditioning and ventilation systems, HVAC units, industrial processes such as drying or dehumidifying materials (e.g., grain), power plants for cooling of exhaust gases after combustion and also for forced-air heating via convection in furnaces. Industrial fans can be classified by their application area into the following categories:

Industrial Ventilation Fan – Used to move large volumes of air over long distances at low velocities with little pressure loss; often referred to as “blowers”. These fans have high static pressures but relatively low flow rates due to restrictions on the supply side of the system (i.e., ducts). They are typically driven by AC induction motors which allow variable speed operation through frequency control using thyristors or phase controllers. The most common types include centrifugal blowers and axial flow impellers. Centrifugal blower type fans may be either single stage or multi-stage devices depending upon how they handle gas recirculation within them. Single stage centrifugal blowers use only one set of blades while two stages employ




Industrial Fan: Bestsellers and current offers in the UK

The best industrial fan in the UK: Our selection

12 Metal Floor Fan

The [(powerful)] 12″ metal floor fan has 80w of power, making it perfect for offices, large rooms and warehouses. With three settings controlled by four buttons on top, this fan is super easy to use. The stylish chrome finish and strong metal grill make this fan a great addition to any office or home. The fan is fully assembled and adjustable up and down at 120 degrees, with rubber feet that keep it steady and secure on any flat surface.

Copper Motor: 28w of power, low noise output, safe for the whole family

At this moment the product mentioned is not available from the supplier. That is why we have replaced it with another one with similar characteristics. Report a problem.

Das Problem mit diesem Produkt wurde gemeldet. Danke!

Looking for a powerful, reliable and safe motor with overheating protection? Look no further than the copper motor. With its 28w of power, this motor is sure to get the job done quickly and efficiently. Plus, its low noise output means you won’t have to worry about complaints from family or co-workers. And because it’s safe for the whole family, you can rest assured that even your littlest ones are protected from harm. Best of all, the tilt adjustable feature gives you more control over your work area.

Create an ad title for a plastic 18-inch double ball key wire motor:

This is a plastic 18-inch double ball key wire motor with a smooth operation and long service life. It has a soft mute gentle air supply that is quiet and cool. The large air volume provides more powerful airflow, making it more suitable for the refreshing rhythm of summer. The ABS plastic five leaves create an evenly distributed wind pattern to prevent wind blade vibration.

The Perfect Fan for Your Kitchen

At this moment the product mentioned is not available from the supplier. That is why we have replaced it with another one with similar characteristics. Report a problem.

Das Problem mit diesem Produkt wurde gemeldet. Danke!

This commercial-grade, high velocity fan is perfect for circulating hot air out of your kitchen. It features a durable all-metal housing that is easy to assemble, with small grid spacing to keep accidental fingers and paws from getting in. The versatile fan is tilt adjustable and portable, with a handle to keep you safe. It can be placed on the floor or hung on the wall, and features wide angle air supply for maximum airflow.

Industrial Fan: Frequently asked questions

What types of Industrial Fan are there and what determines a good product?

There are three types of Industrial Fan. They include axial flow fans, centrifugal fan and blower fans.

The first thing to look for is the CFM (Cubic Feet per Minute) of air that a fan can move. This will determine how much area it can cool or heat. A good rule of thumb is 10,000 cubic feet per minute (CFM) for every 1,000 square feet you want cooled/heated. So if you have an office space with 2,500 sq ft and need to keep it at 75 degrees F then your fan should be able to move 25,000 CFMs in order to do so effectively without overworking itself and causing damage from overheating. Another factor that determines a good Industrial Fan is its noise level which we measure in decibels(dB). Most fans are between 70-80 dBs but some industrial grade models go as low as 50 dBs while others reach up into the 90’s. If sound levels are important than make sure not only check out their specs on this page but also read our article about How Loud Are Industrial Fans? Lastly there are two types of motors used by most manufacturers; permanent split capacitor (PSC), or variable speed induction motor (VSI). PSC motors tend to last longer because they don’t use brushes

Who should use a Industrial Fan?

Industrial Fans are used in many different applications, including HVAC (heating, ventilation and air conditioning), commercial refrigeration/freezers, manufacturing facilities or any other application where a large volume of air is needed.

Based on what criteria should you buy a Industrial Fan?

The selection of Industrial Fan should depend on the requirement from the user. Some fans are used for commercial purpose, some are used in residential area and some others can be used at offices. So depending on these factors you have to select one that is suitable for your needs.

There are a few factors you should consider when comparing industrial fans. You need to check the power consumption, size and noise level of each fan before making your purchase decision.

What are the advantages and disadvantages of a Industrial Fan?

Advantages

Industrial fans are used for a variety of purposes, including cooling and ventilation. They can be mounted on the roof or in an attic space to help circulate air throughout a building. Some industrial fans have built-in heaters that allow them to warm up cold areas during winter months as well.

Disadvantages

The disadvantages of an industrial fan are that they can be very noisy and the air flow is not as good as a commercial or residential fan.

Shopping Guide: Everything you need to know

Which brands and manufacturers are represented in our review?

In our review, we present products from various manufacturers and suppliers. The list includes products from the following brands and manufacturers, among others:

  • PureMate
  • Power Star
  • Belaco

What is the price range of the featured products?

The cheapest Industrial Fan in our review costs around 24 pounds and is ideal for customers who are conscious about their money. However, those who are willing to spend more money for better quality can also spend around 199 pounds for one of the more expensive products.

Reviews